‘Zero Bypass’ Design and True HEPA Filter. The Ultimate Combination of Power & Portability
Exceptional performance and a full array of user-friendly features have made the Abatement Technologies® PAS2400 Portable Air Scrubber a popular choice for capturing airborne particles during construction restoration projects. With peak tested airflow of up to 2,100 cfm, and a maximum static lift of 5.5”, it’s the highest output Portable Air Scrubber that is NRTL-certified to operate safely on a 120 V/15 amp electrical supply.
With more power, more capacity and a whole lot more wheels on the ground, the gas and diesel 1934W Gator models have a rock-solid rep for digging in and moving mountains. And they’re unbelievably stable-thanks to their extra-long wheelbase and low center of gravity. They include the high capacity, Convertible Deluxe Cargo Box. And they’re light on turf. In short, when it comes to work, they bring it.
The 210P compressor gives more air and is built with the bigger contractor in mind. The larger 210P compressor has two full length tool boxes, two large service doors, galvanized inner fenders and has Galveneal coating and powder coated sheet metal for rust and scratch protection, plus a cooler cleaning access panel.
Powered by an 74 hp John Deere diesel engine, and this design has two stage air filters and large 29 gallon fuel tank for full shift duties and the extra CFM will run more tools and give more air for sandblasting in the smaller 185P style package.
No belts. No chains. No downtime. The SweepMaster 200 is the only all hydraulic drive sweeper in the industry. The independently variable ground speed and broom speed can be matched for challenging sweeping conditions, allowing you to get the best result for the job at hand. By placing the broom angle adjustment at the hand controls, the SweepMaster 200 makes it easy for the operator to adjust the broom angle when needed. The sweeping height can also be adjusted with a convenient hand crank that offers more precise adjustment for better sweeping performance and increased wafer life. And because of its repositioned engine and muffler, the SweepMaster 200 is safer and quieter to use.
The 185P compressor is built with the contractor in mind. The larger 185 P compressor has two full length tool boxes, two large service doors, galvanized inner fenders and has Galveneal coating and powder coated sheet metal for rust and scratch protection, plus a cooler cleaning access panel. Powered by a 49 hp John Deere diesel engine, this design has two stage air filters and large 29 gallon fuel tank for full shift duties.
Thru Intec’s industry partnerships we offer a 14 hp vacuum. The vacuum is designed for fast & profitable recycling of spray applied insulation, and removal of damaged insulation due to fire, water, and smoke. It provides simple, versatile, and profitable alternatives for the professional contractor.
Make Short Work of Insulation Recycling or Removal
The 6” inlet and outlet provide high production rates, yet can also be reduced to 4” inlet and outlet if desired.
Proven and accepted as #1 leader in the rental sweeping industry, the LayMor SweepMaster 300 is operator friendly and is easily transported from job to job. There is no need to raise the front wheel off the ground for towing purposes and the tongue can pivot right or left and up and down for faster and easier hook-up. More easily accessible maintenance allows for servicing the unit quicker and simpler than competitive products.
18V Cordless XRP™ Self-Leveling Int/Ext Rotary Laser
Fully automatic horizontal and vertical self leveling with out-of-level shutoff eliminates user error, ensures accuracy, and reduces set-up time.
Variable-speed dial settings from 1,400-2,000 RPM. Brush-type skirt surrounds sanding pad, preventing gouging of wall joints and aiding in dust collection. Motor located on opposite end of handle from sanding head, providing balance and control. Built-in dust collection hose.
Ideal for edge grinding along vertical surfaces, removing coatings, build-ups, markings, overlays or paints.
The newly upgraded KBE5L 2-Step is now equipped with a High and Low output control making it very economical. Also included is a Fuel preheater to keep fuel moving smoothly as temperature decreases.
KBE5L’s state of the art combustion chamber enables virtually 100% fuel to energy conversion. This translates to clean, odorless, smokeless operation and, more importantly, fuel savings.
Impervious to nature’s elements (wind, rain, and snow), the KBE5S is able to transfer infrared heat directly to the object without any loss of heat or air movement.
The TA10 is ideal for commercial areas and large residences. Two independent tine rotors with 32 interchangeable closed spoon 1/2" tines provide superior maneuverability around corners and tight areas. Five optional weight containers ensure optimal soil penetration. Tip wheels allow the TA10 to easily pass through narrow openings. The rugged design of these aerators offers years of low-maintenance productivity.
This tamper is ideal for tamping asphalt, gravel, stone, and dirt. The high quality ash handle is flexible and durable. The heavy 10.6-lb. steel head makes a great tool for heavy duty construction, industrial, and commercial applications.
The frame is constructed of galvanized steel for strength and durability and features a tilt bed with positive automatic locking mechanism for fast easy loading.